All Categories
GET IN TOUCH
OSRAM LED

Home /  Products /  OSRAM LED

OSRAM automotive LED KW3 CGLNM2.TK 9w white SMD
OSRAM automotive LED KW3 CGLNM2.TK 9w white SMD

OSRAM automotive LED KW3 CGLNM2.TK 9w white SMD

  • Introduction

Introduction

Place of Origin: Germany
Brand Name: OSRAM
Model Number: KW3 CGLNM2.TK
Certification: AEC-Q102


Minimumpacking Quantity: 2000
Price:
Packaging Details: Tape and Reel
Delivery Time:
Payment Terms:


KW3 CGLNM2.TK

OSLON® Compact PL

Compact light source with isolated thermal pad for improved heat dissipation and small z-tolerance (+/-35 µm).

The OSLON Compact PL product family meets both excellent brightness in combination with outstanding luminance.


Applications

—Headlamps, LED & Laser & Night Vision


Features:

—Package: Ceramic package

—Chip technology: UX:3

—Typ. Radiation: 120° (Lambertian emitter)

—Color: Cx = 0.325, Cy = 0.345 acc. to CIE 1931 (● white)

—Corrosion Robustness Class: 3A

—Qualifications: AEC-Q102 Qualified

—ESD: 8 kV acc. to ANSI/ESDA/JEDEC JS-001 (HBM, Class 3B)

—Color over angle: Better than passus 3.7.2.1 of supplement proposal 7 to ECE reg. 128


Ordering Information

image


Maximum Ratings

image

* The median lifetime (L70/B50) for Tj = 175°C is 100h.


Characteristics

I F = 1000 mA; TS = 25 °C

image


Brightness Groups

image

Forward Voltage Groups

image


Chromaticity Coordinate Groups

image

Chromaticity Coordinate Groups 4)

image


Group Name on Label

Example: T2-4L0-AB

image


Relative Spectral Emission 7)

Φrel = f (λ); IF = 1000 mA; TJ = 25 °C

image

Radiation Characteristics 7)

I rel = f (ϕ); TJ = 25 °C

image

image
image

image

image

image

image

image

Dimensional Drawing 9)

image

Further Information:

Approximate Weight:                                         28.5 mg

Corrosion test:                                                    Class: 3A

Test condition:                                                     40°C / 90 % RH / 15 ppm H2 S / 14 days (stricter than                                                                               IEC 60068-2-43)

ESD advice:                                                          The device is protected by ESD device which is                                                                                            connected in parallel to the Chip.

Electrical Internal Circuit

image

Recommended Solder Pad 9)

image

For superior solder joint connectivity results we recommend soldering under standard nitrogen atmosphere. Package not suitable for ultra sonic cleaning. To ensure a high solder joint reliability and to minimize the risk of solder joint cracks, the customer is responsible to evaluate the combination of PCB board and solder paste material for his application.


Reflow Soldering Profile

Product complies to MSL Level 2 acc. to JEDEC J-STD-020E

image

image

All temperatures refer to the center of the package, measured on the top of the component

* slope calculation DT/Dt: Dt max. 5 s; fulfillment for the whole T-range


Taping 9)

image

Tape and Reel 10)

image

Reel Dimensions

image


Barcode-Product-Label (BPL)

image

Dry Packing Process and Materials 9)

image

Moisture-sensitive product is packed in a dry bag containing desiccant and a humidity card according JEDEC-STD-033.


Type Designation System– OSLON Compact PL

image

Notes


The evaluation of eye safety occurs according to the standard IEC 62471:2006 (photo biological safety of lamps and lamp systems). Within the risk grouping system of this IEC standard, the device specified in this data sheet fall into the class moderate risk (exposure time 0.25 s). Under real circumstances (for exposure time, conditions of the eye pupils, observation distance), it is assumed that no endangerment to the eye exists from these devices. As a matter of principle, however, it should be mentioned that intense light sources have a high secondary exposure potential due to their blinding effect. When looking at bright light sources(e.g. headlights), temporary reduction in visual acuity and afterimages can occur, leading to irritation, annoyance, visual impairment, and even accidents, depending on the situation.

Subcomponents of this device contain, in addition to other substances, metal filled materials. Metal filled materials can be affected by environments that contain traces of aggressive substances. Therefore, we recommend that customers avoid device exposure to aggressive substances during storage, production,and use.

For further application related information please visitwww.osram-os.com/appnotes


Disclaimer

Attention please!

The information describes the type of component and shall not be considered as assured characteristics.

Terms of delivery and rights to change design reserved. Due to technical requirements components may contain dangerous substances.

For information on the types in question please contact our Sales Organization.

If printed or downloaded, please find the latest version on the OSRAM OS website.


Packing

Please use the recycling operators known to you. We can also help you – get in touch with your nearest

sales office. By agreement we will take packing material back, if it is sorted. You must bear the costs of

transport. For packing material that is returned to us unsorted or which we are not obliged to accept, we shall have to invoice you for any costs incurred.


Product and functional safety devices/applications or medical devices/applications

OSRAM OS components are not developed, constructed or tested for the application as safety relevant

component or for the application in medical devices.

OSRAM OS products are not qualified at module and system level for such application.


In case buyer – or customer supplied by buyer – considers using OSRAM OS components in product safety devices/applications or medical devices/applications, buyer and/or customer has to inform the local sales partner of OSRAM OS immediately and OSRAM OS and buyer and /or customer will analyze and coordinate the customer-specific request between OSRAM OS and buyer and/or customer.


Glossary

1)Brightness:Brightness values are measured during a current pulse of typically 1 ms, with an internal

reproducibility of ±8 % and an expanded uncertainty of ±11 % (acc. to GUM with a coverage factor of

k = 3).

2)Operating Temperature:The Operating Temperatur Top is referenced to the Solderpoint Ts of this device. Proper current derating must be observed to maintain junction temperature below the maximum.

3)Reverse Operation:This product is intended to be operated applying a forward current within the

specified range. Applying any continuous reverse bias or forward bias below the voltage range of light

emission shall be avoided because it may cause migration which can change the electro-optical characteristics or damage the LED.

4)Chromaticity coordinate groups:Chromaticity coordinates are measured during a current pulse of

typically 1 ms, with an internal reproducibility of ±0.005 and an expanded uncertainty of ±0.01 (acc. to

GUM with a coverage factor of k = 3).

5)Forward Voltage:The forward voltage is measured during a current pulse of typically 1 ms, with an

internal reproducibility of ±0.05 V and an expanded uncertainty of ±0.1 V (acc. to GUM with a coverage

factor of k = 3).

6)Thermal Resistance:Rth max is based on statistic values (6σ).

7)Typical Values: Due to the special conditions of the manufacturing processes of semiconductor devices, the typical data or calculated correlations of technical parameters can only reflect statistical figures.These do not necessarily correspond to the actual parameters of each single product, which could differ from the typical data and calculated correlations or the typical characteristic line. If requested, e.g.because of technical improvements, these typ. data will be changed without any further notice.

8)Characteristic curve: In the range where the line of the graph is broken, you must expect higher differences between single devices within one packing unit.

9)Tolerance of Measure:Unless otherwise noted in drawing, tolerances are specified with ±0.1 and

dimensions are specified in mm.

10)Tape and Reel:All dimensions and tolerances are specified acc. IEC 60286-3 and specified in mm.


Revision History

image

RELATED PRODUCT